WM3500 Sawmill
Versatility and Productivity
- Overview
- Features
- Specifications
- Video
The WM3500 is big, fast, and puts you in control. This industrial-grade horizontal headrig includes energy, labor, and yield benefits PLUS features a wider throat capacity to accommodate larger logs, faster hydraulic log handling, and three side supports. The WM3500 brings versatility and productivity to your operation and is ready to help make your sawing operation a success.
WM3500 Pantograph
- Eliminate the need for a cat-track (cable carrier)
- Move wiring out of area where debris falls
- Easily route sawdust removal tube
- Allow easy access to WM3500 for maintenance and cleanup
Overall Dimensions
| Length (WM3000 Frame) Length (with Operator Station & 10” between) Width (Sawmill Only, Max Blade Guide Arm Position) Width (Sawmill w/Right-Hand Cable Boom, Max Boom & Blade GuideArm Position) Width (Sawmill w/Left-Hand Cable Boom, Max Boom & Blade Guide Arm Position) Height (Ground To Mast) Height (Max Head Position) Height (Cable Boom) Bed Height (Ground To Bed) |
26’- 2 15/16” 35’-9 1/32” 9’-5 3/4” 19’-6 11/16” 15’-9 1/4” 8’-6 1/4” to 9’-2 3/4” (Adjustable w/feet) 9’-6 1/4” to 10’-2 3/4” (Adjustable w/feet) 11’-2” 30” to 38 1/2” (Adjustable w/feet) |
Cutting Capacities
| Length Length (with Board Removal) Diameter Max. Clamp Width (from stop block) Min. Clamp Width (from stop block) Max. Throat Width (guide to guide) Max. Cant Width (outer guide to stop block) Max. Cutting Depth @ 24” wide Max. Cutting Depth @ 22” wide |
21’-6” 20’-3” 40” 26” 2” 34” 31” 5” 13” |
Blade Motor
| Manufacturer Horsepower Rating RPM Drive Shaft O.D. Drive Belt (60/50 Hz) Blade Braking |
Lincoln 30 1725 1 7/8” Eagle PD G2380 2.6 Seconds |
Rates
| Normal Power Usage Max. Forward (Not Cutting) Reverse Saw Head Up (24”) Saw Head Down (24”) Startup force required to raise saw head Clamp (full travel) Log turner (turn 4200 lb. log 90°) |
66 Amps, 35.90 kVa or 42.60 kWh 170 ft./min. 300 ft./min. 7.45 sec. 6.58 sec. 2175 lbs. 2.3 sec. 2.3 sec. |
Options
| Operator Station Cab A/C for Cab |
CAB2 AC1 |
Electrical Requirements
| Electrical Service Fused Disconnect Time Delay Fuse Cab Option (No A/C) Cab Option (w A/C) Suggested Wire Size (50’ max.) |
460V 3-Phase 100A 100A 70A 110V 1-Phase 15A Service 110V 1-Phase 30A Service 4AWG |
Air Requirements
| Shop Air Supply | 110 psi @16.5 cfm |
WM3500 Horizontal Thin-Kerf Sawmill Video