Products


"The AWMV Sawmill is a much safer machine than anything else I've seen and, because a blade can be changed in less than five minutes, downtime is absolutely minimized in our plant."

Bill Oerding - Woodwurx Corporation - Chino, California

HR1000 MultiHead Resaw

Rugged, High-production, Low-Maintenance

  • Overview
  • Features
  • Specifications
  • Videos

Ideal for producing pallet boards, stringers, fencing material, flooring blanks, dimensional lumber, and much more, the MultiHead Resaw can cut up to seven boards in one pass. Increase production at a lower cost and cut almost any species of wood with a positive feed system that easily handles frozen material. Flexible with one to six heads.

MultiHead

The Multihead horizontal band resaw uses a durable and dependable steel slat bed conveyor in combination with synchronized top rollers to feed material through the saws. The steel track boasts a longer life compared to rubber conveyors and helps produce more accurate lumber with less maintenance.

 

 

The MultiHead Resaw is designed to be easy to operate and maintain. Safety features like dual E-stops and an interlocked safety fence set it apart from any other thin-kerf resaw bandsaw. The fence keeps operators out of the cutting zone and prevents the machine from starting while the blade covers are open. Blade adjustments are fast, with large easy-to-read scales and included step gauges that make size changeovers simple.

Overall Dimensions

1 Head & 2 Head 3 Head & 4 Head 5 Head & 6 Head
Length 13' 10" (4.2m) 18' (5.5m) 23' 2" (7.1m)
Width 9' 1" (2.8m) 9' 1" (2.8m) 9' 1" (2.8m)
Height (Heads at highest position) 6'8" (2.0m) 6'8" (2.0m) 6'8" (2.0m)
Headroom required (doors open) 9' 8" (2.9m) 9' 8" (2.9m) 9' 8" (2.9m)
Table Height 36" (91cm) 36" (91cm) 36" (91cm)
Length w/ Merry-Go-Round 31' 7" (9.6m) 36' 3" (11.1m) 40' 11" (12.5m)
Width w/ Merry-Go-Round 10' 3" (3.1m) 10' 3" (3.1m) 10' 3" (3.1m)
     
     

Weights

1-Head 3,030lbs (1,377kg)
2-Head 3,880lbs (1,764kg)
3-Head 4,950lbs (2,114kg)
4-Head 5,800lbs (2,637kg)
5-Head 6,870lbs (3,123kg)
6-Head 9,440lbs (4,281kg)

Power

Blade Motor 25HP, 380/460V, 50/60Hz, 1,725RPM

Electrical Service

Power Supply 460V, 3Ph, 60Hz
Required Amps per Heads 1-head
40Amp

2-heads
75Amp

3-heads
105Amp

4-heads
135Amp

5-heads
170Amp

6-heads
200Amp

Blades Wheels

Size 34" (86cm) Diameter steel, rubber tired
Axles/Bearings Fixed shafts, Timken Bearings
 

Cutting Capacities

Maximum Length Unlimited
Maximum Length w/Merry-Go-Round 8' (2.4m)
Minimum Length 28" (71cm)
Maximum Material Height 12" (30cm)
Maximum Head Height 12" (30cm)
Minimum Cut Height .25" (6mm)
Track Width 7.5" (19cm)
Maximum Material Width 12" (30cm)
Maximum Material Width
w/ Merry-Go-Round		 8"(20cm)
Minimum Width 1" (25cm)
Feed speed adjustment 0 - 33 m/min
(0-100 fpm)

Air Requirements

Resaw 80 - 125psi@5cfm
Resaw w/Merry-Go-Round 80 - 125psi@5cfm

Hydraulic System

Motor 4HP 380/460V
1,725RPM 50/60Hz TEFC
Pump 4GPM

Dust collection

6" (15mm) Dust Collection Port

 


HR1000 MultiHead Horizontal Resaw Introduction


HR1000 MultiHead Horizontal Resaw
©2012 AWMV - All Rights Reserved